Cimarron Firearms Model 1892 357mg 24in Oct Blue W/case Colors Reviews
Cimarron Firearms and Uberti of Italia have well-earned the reputation for groovy guns at great prices. Head to whatever Cowboy Action Shooting match and yous'll undoubtedly find the guns from these giants of the industry very well represented. That goes doubly so for Cowboy Action Mounted Shooting.
For their newest release, the Pistoleer, Cimarron Firearms has created a budget-minded half dozen-gun modeled closely later on the Pre-War Colt Model P. I've reviewed several Cimarron guns now and the level of historically accurate detail they put in the guns is amazing, and much appreciated. Every one of their guns is a adept looker and a expert shooter, and this Pistoleer is no exception.
Cimarron Firearms is far more than an importer of Uberti guns. Those two companies have a partnership that spawns decades and generations. If you want to larn more than about those companies, I'd highly recommend the Story of Cimarron Firearms on their Youtube channel.
The Pistoleer line will eventually have two different finish types and come in both .45Colt and .38/.357Magnum. One model volition include a polished hammer and trigger guard as well as a nickel plated backstrap for a 2-tone effect.
I received the more traditional version, with everything blued, including the frame and backstrap. Even on this fairly inexpensive model, Cimarron hasn't forgotten to pay attention to the finish. With this all-blued model, the finish is subdued, with nothing specially flashy. The black blued metal throughout the gun is polished to a shine, but not a mirror finish. It's well done and even throughout the firearm.
The ejector nut is the new model one-half moon style as opposed to the larger full circumvolve on the Old Model guns, which were more similar to the early Filly black pulverization cartridge frames.
Standing in that same manner, you'll find a charcoal blued base pivot latch. That's a dainty touch, and it'south carried on to all of the exterior screws. They are not brilliant blued nitre, only the more than traditional blue constitute on the early guns. Yous'll need sunlight or brilliant indoor low-cal to bring out the colors.
According to Cimarron'southward press release and my email conversation with them, the Pistoleer is currently scheduled to be in two finishes and two calibers, merely so far only this 1 4 3/4″ barrel length. Unless it's a revolver specifically for hunting, this is very much my preferred barrel length. It's long enough for a good sight radius, fast out of the holster, and is also merely aesthetically pleasing since it ends along with the ejector housing. The early originals had longer barrels than this, just we notice people all over the West cutting these barrels to this length almost immediately after the erstwhile Colts were released.
The grip on the Pistoleer is 2 pieces of walnut that include Cimarron's medallion logo. The walnut is stained in the slightly cherry hue we oft meet from Uberti. The wood-to-metallic fit is adequate, simply nothing spectacular. On this particular gun, the wood is affluent on the left side of the gun where it meets the frame, but slightly proud on the right, maybe by half a millimeter.
Uberti didn't skimp on the trigger of the Pistoleer. Information technology breaks clean, with no take-up and little movement. Measured on a Lyman digital trigger scale, the average of five trigger pulls was i lb 9.2 oz. I would have guessed less. The trigger shoe itself is small, thin, and curved, in the traditional grade. There is a minor fleck of backlacklash as the hammer falls, but nothing to take you off target.
When this revolver is at residue, there is, equally there should be, some amount of cylinder end shake and play. Shaking the gun in the manus will result in aural and tactile sounds of the cylinder shaking fore and aft, left and right. But there'due south not much give at all, certainly no more than whatever of my Colts.
Upon full lock-up yet, the rotational play and end shake completely cease. When it matters, the Pistoleer locks the cylinder up nicely.
I'm not sure what the hammer spring weight of the Pistoleer measures, just it is much less than my older Uberti Cattleman. I recently re-sprung a couple of Ruger Blackhawks with 17 lb. springs, and the Pistoleer feels noticeably lighter than those guns. It was so light and like shooting fish in a barrel to erect that I was concerned that information technology would fail to ignite difficult primers.
This fright was put to rest, as CCI Large Pistol #300 primers are all that I have bachelor for my reloads. The gun set over 200 of these without event. As CCI primers are near the hardest commonly bachelor, if information technology sets off these, information technology will set off anything you are likely to run through the gun. The terminate consequence is an like shooting fish in a barrel to erect, very fast and reliable firearm.
The Pistoleer includes Uberti'due south floating firing pin safety. Quite simply, the firing pin isn't rigidly fixed on the hammer, so it has the power to move dorsum a bit when the hammer is at rest. It's always a good practise to exit the hammer of a traditional unmarried action on an empty chamber, but this floating firing pin provides you some margin of error. Since the pivot isn't pressing hard against the primer when the hammer is at rest, it is less likely to provide sufficient force to cause an unintentional discharge. Yet, load one, skip 1, load four.
As the Pistoleer is a model based on the original Peacemaker, it features the traditional fixed channel rear sight and simple front blade. The forepart sight on this item pistol measures .094″ on my Browne and Sharp calipers, providing a good corporeality of calorie-free on either side of the rear sight while aiming.
Cylinder throats measure .455″, every bit does the forcing cone, and the barrel groove bore measures at .451″. Equally far every bit the cylinder gap, a .01″ feeler gage tin wiggle into the gap when the cylinder is pushed fully to the rear, which is a little more than I would promise for and is likely robbing the round of a picayune velocity. If this were a Ruger or Freedom Arms single action .45 Colt built for 20,000 PSI or more, I'd like to run into that gap closer to .005″. Equally it's non, I don't.
At the range, I spent my last box of Winchester white box for this review (y'all ungrateful cretins). The only commercial circular I had bachelor shot reasonably well, landing an average of 2.ii″ v round groups averaged over four shot strings at 25 yards.
The starting load I employ in my New Original Henry and Uberti Cattleman Old Model is not appreciated in this particular gun. That circular prints 5.four″ groups, and lands 15″ low of the point of aim at 25 yards. A classic Keith style 255 gr. coated bullet, pushed past 6.two gr. of Titegroup gets the bullet correct on target, with a 1.half-dozen″ average group. All groups were shot off a bagged rest and through a well-fouled bore.
I've had this gun for a little over a month, and in that time ammunition and reloading components haven't gotten any easier to find. That means this gun has gotten a whole lot of dry fire exercise, and not a whole lot of shooting. I put 260 rounds through the gun for this review. Ii hundred x of those were using various paw loads, 50 commercial Winchester rounds. 10 of the handloads were GOEX FFFg black powder, the residual were smokeless powders to include Dirt Dot, Unique, and Titegroup. Most of the rounds were shot around 13Kpsi (estimated) pressure.
I wiped down the revolver upon receipt, ran a diameter serpent through the barrel and each sleeping accommodation of the cylinder, and sprayed a footling CLP in the gun. Later that, I didn't make clean the gun in whatever way until all of the firing was washed and information technology was fourth dimension for photos.
The gun never failed in any fashion and showed no boosted article of clothing. I measured the end-milkshake and cylinder gap after the shooting was complete and, as expected, they remained exactly the same. Spent shells were pressed out easily by the ejector, falling with nothing more than than an easy press and a tip up of the muzzle.
For folks just wanting a good single action for protection, light game, or target shooting, the Pistoleer would fit the bill just fine. But that'southward not why I was interested in it. Ever since I got into Cowboy Action Shooting earlier this year, I've been trying to figure out how to get more folks involved. The biggest barrier to entry is the cost of four guns. And every bit before long equally you get them, you generally want to start improving them.
Guns similar the Pistoleer go a long way to solving that problem. This gun needs admittedly zero modification to shoot well at any match. Sure, you could probably practice some work to it, only information technology wouldn't make a deviation to all but the top five percent of shooters. That ways that Cimarron has put out non but a proficient gun, simply a "race ready" pair of guns in the hands of shooters for most $1,000. Based on what I've seen from Cimarron and Uberti in the past, I'grand not surprised, simply I am appreciative.
The Pistoleer is so new that information technology'south not up on the Cimarron website yet. If you lot are interested in one, contact them, or their retailer, Texas Jacks Wild West Outfitters in Fredericksburg, Texas.
Specifications: Cimarron Pistoleer Blued in .45 Colt
Original Manufacturer: Uberti of Italy
Caliber: .45 Colt
Capacity: 6
Butt: 4 3/4″ shallow groove
Frame: Blued Steel
Cylinder: Blued Steel
Grip: Plow Handle, Blued Steel Grip Frame
Safety: Floating Firing Pin
MSRP: $518.lxx
Ratings (out of 5 stars):
Style and Advent * * * *
There'southward no case hardening or fancy wood. There is, withal, a great dark blued cease with contrasting charcoal blued screws and accents.
Customization * * * * *
In that location's no revolver in history that has every bit many modifications and customizations than the Model P and its clones. They price coin.
Accurateness * * * *
With the right round, it shoots bang-up for any hunting or Cowboy Activeness Shooting.
Reliability * * * * *
Perfect reliability with whatever round and powder.
Overall * * * *
With a near $500 MSRP, this guns will sell, and for expert reason. Cimarron and Uberti take made a relatively cheap Old West revolver with good look. A nifty trigger and outstanding activeness bumps it solidly over the average three-star rank. The action is far better than I would expect at this price, and it looks nice to boot. If I had a few hundred more primers, I'd have spent them shooting this gun just for the fun of it.
Source: https://www.thetruthaboutguns.com/gun-review-cimarron-pistoleer-by-uberti/
0 Response to "Cimarron Firearms Model 1892 357mg 24in Oct Blue W/case Colors Reviews"
Post a Comment